Grinders / Baratza Encore ESP

Baratza Encore ESP

4.5 / 5 • Güncelleme Tarihi September 2026
Grinders

Temsili görsel (stok fotoğraf); ürünün kendisi değildir.

The Entry Grinder, Re-Geared

The original Baratza Encore has been the standard recommendation for a first burr grinder for over a decade, with one persistent caveat: its finest settings were not really fine enough for espresso. The ESP version addresses exactly that, redistributing the 40 grind steps so that roughly the first 20 fall in espresso territory and the rest cover filter.

That is the whole story of this product. It is not a new grinder so much as a re-ranged one, using the same 40mm conical burrs and the same body as the model it is based on. Whether that represents good value depends entirely on whether you brew espresso, filter, or both.

Burrs, Motor And Build

The 40mm conical burrs are made by Baratza and are the same design used across the Encore line. Conical burrs at this size and price produce a grind distribution that is perfectly good for filter and workable for espresso, but with more fines than a larger flat-burr grinder — which shows up as a slightly muddier cup at espresso ratios compared with grinders costing three or four times as much.

The body is plastic with a metal-geared motor and the machine is designed to be repaired rather than replaced. Baratza's parts availability and repair support are the genuine reason this line has the reputation it has: burrs, gearboxes and motors are sold individually and the company publishes repair guides. Over a ten-year horizon that matters more than the specification.

Using It For Espresso

The stepped adjustment is the main practical limitation. Espresso often wants an adjustment finer than one full step, and with 20 steps covering the espresso range you will sometimes find yourself between two settings — one that runs slightly fast and one slightly slow. Experienced users work around this by adjusting dose slightly rather than grind, which is a legitimate technique but is a workaround.

Retention is modest but present, and the grinder benefits from the usual routine of a small purge or a light tap before dosing. It is not a single-dosing grinder and does not pretend to be.

Against The Alternatives

Against the standard Encore, the ESP is the right choice only if espresso is part of your routine; for pour-over and French press alone the cheaper model covers the same ground with a more useful spread of settings.

Against dedicated entry espresso grinders in the same bracket, the Encore ESP generally trades outright espresso grind quality for versatility and repairability. If you brew only espresso and never filter, a stepless grinder in the same price range will give finer control. If you brew both, the ESP covers both competently, and that is its argument.

Who Should Look Elsewhere

Anyone chasing light-roast espresso at high extraction will find the conical burrs and stepped adjustment limiting sooner rather than later. That pursuit needs flat burrs and stepless adjustment, and no amount of technique closes the gap.

It is also not the right grinder for a household grinding large quantities at once. The motor is geared for domestic duty cycles, and while it is repairable, sustained heavy use is not what it was designed around.

The Verdict

The Encore ESP is the sensible grinder for someone who makes espresso at home a few times a day and also brews filter at the weekend. It grinds well enough for both, and Baratza's repair support means it is a purchase with a long tail.

Buyers who only ever pull espresso, and who care about chasing extraction, should spend the same money on a stepless espresso-specific grinder and accept that it will be worse at filter.

Bir bakışta

Artılar

  • Roughly 20 of the 40 steps fall in usable espresso range
  • Same repairable design and parts support as the wider Encore line
  • Handles both espresso and filter competently
  • Metal-geared motor rather than an all-plastic drive

Eksiler

  • Stepped adjustment sometimes leaves you between two settings
  • Conical burrs produce more fines than flat-burr espresso grinders
  • Not a single-dosing design; some purging needed

Sıkça sorulan sorular

Is the Encore ESP fine enough for a pressurised basket machine?

Comfortably, yes — pressurised baskets are forgiving and the ESP's espresso range is far finer than they require. The grinder's value shows up more clearly if you later move to single-wall baskets.

Can I still use it for French press and pour-over?

Yes. Roughly half the range is given over to filter grinds. You have fewer filter steps than on the standard Encore, but the coarse end still reaches French press territory.

How does it compare with hand grinders at the same price?

A good hand grinder in this bracket will often out-grind it for espresso, particularly in burr quality. The Encore ESP's advantage is that it is electric and unattended, which matters more than grind purity to most people making coffee before work.

Teknik Özellikler

Burr type40 mm conical
Grind settings40 stepped
Espresso rangeApprox. first 20 steps
AdjustmentStepped, by rotating the hopper
DriveMetal gearbox, DC motor
Hopper capacityApprox. 227 g
RepairabilityUser-serviceable; parts sold individually
Single dosingNot designed for it

Özet

The right grinder for a household that brews both espresso and filter and wants a machine it can repair rather than replace. Espresso-only buyers chasing extraction should spend the same money on a stepless, flat-burr grinder instead.

Amazon'da Fiyatı Kontrol Et