Fellow Ode Brew Grinder Gen 2
Symbolbild (Stockfoto); nicht das abgebildete Produkt.
A Grinder That Refuses To Do Espresso
Most grinders try to cover everything and compromise somewhere. The Ode does the opposite: it is built for filter coffee only, and its range simply does not reach espresso fineness.
That constraint buys a lot. The 64mm flat burrs are larger than almost anything else at the price, the range is entirely devoted to the filter spectrum so the adjustment steps are usefully fine within it, and the geometry can be optimised for a single job.
For anyone who brews pour-over, Chemex, AeroPress or batch filter and has no espresso machine, this focus is a feature rather than a limitation.
Single Dosing And Retention
There is no hopper in the conventional sense — you drop in the dose you intend to brew, and the grinder is designed to give essentially all of it back. Retention is very low, which is what makes switching beans between brews practical.
The Gen 2 improved the burr set and the anti-static handling over the original, which had a reputation for clumping and for grounds clinging to the chute. The second generation is meaningfully better on both counts.
A small knock or tap still helps clear the last of the grounds, as with any grinder, but this is a device you can genuinely use for three different coffees in a morning.
Build And Footprint
It is a squat, heavy, well-finished machine with a magnetic catch cup and a single dial. The footprint is small for a 64mm grinder because the absence of a tall hopper removes most of the height.
The build quality is what you would expect from Fellow — considered, tactile and slightly style-forward. The catch cup is the part most likely to be knocked off a counter.
Noise is worth mentioning because it is unusual for a grinder with burrs this large. The motor is geared down and the body is heavy enough to damp vibration, so it grinds with a low grumble rather than the shriek smaller high-speed grinders produce. For anyone brewing early in a flat with thin walls, that matters as much as any specification, and it is one of the quieter ways to grind 64mm-flat-burr coffee at home.
Against The Alternatives
Against the Baratza Encore ESP, the Ode gives much larger burrs and much better filter grind uniformity, and gives up espresso capability entirely.
Against the Eureka Specialita, the two barely overlap: one is an espresso grinder and the other a filter grinder. Households doing both need either two grinders or a compromise machine.
Who Should Not Buy It
Anyone who owns or plans to own an espresso machine should not buy this as their only grinder. It cannot grind fine enough and no adjustment changes that.
Anyone who brews large batches from a hopper and wants to walk away will find single dosing tedious rather than liberating.
The Verdict
The best filter-only grinder at the price by some margin, and the single-dosing design makes it genuinely pleasant to use with several different coffees.
It does not do espresso, and that is not a flaw to be worked around but the premise of the design. Buy it knowing which coffee you make.
Auf einen Blick
Vorteile
- 64mm flat burrs are unusually large for the price
- Very low retention; genuine single dosing
- Filter-only range means finer useful adjustment within it
- Compact footprint with no tall hopper
Nachteile
- Cannot grind fine enough for espresso, by design
- Single dosing is tedious for large batches
- Magnetic catch cup is easy to knock off
- Price is high for a filter-only machine
Häufig gestellte Fragen
Can it be modified to grind espresso?
Aftermarket burr sets exist that extend the range, but the machine was not designed for it and the results are not comparable to a dedicated espresso grinder. If espresso is in your plans, buy a different grinder.
What changed in Gen 2?
A revised burr set and better anti-static and chute handling. The original had a genuine reputation for clumping and clinging grounds; the second generation addresses both, which was the main complaint.
Is single dosing annoying?
It depends entirely on how you brew. For one or two brews with different beans it is ideal and makes switching trivial. For grinding several hundred grams for a batch brewer it is a chore.
Spezifikationen
| Burrs | 64 mm flat |
| Range | Filter only — not espresso capable |
| Dosing | Single dose, no hopper |
| Retention | Very low |
| Adjustment | Stepped, filter range only |
| Catch cup | Magnetic |
| Generation changes | Improved burrs and anti-static over Gen 1 |
| Footprint | Compact, squat |
Fazit
The filter grinder to buy if you never make espresso: large flat burrs, near-zero retention, genuine single dosing. It will not grind for espresso, ever.
Preis auf Amazon prüfen